Product ID:QUICK DRY SPRAY ENAMEL 55-B
MSDS Date:04/06/1993
FSC:8010
NIIN:00N047272
MSDS Number: BSWLP

PPG INDUSTRIES INC

ONE PPG PLACE
PITTSBURGH, PA 15272-0001
US

Emergency Phone: 412-434-3131

Info Phone: 412-434-3131

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

SIGNIFICANT HAZARD FOR MAN. METHYL ETHYL KETONE

RTECS: 9999999ZZ

EFFECTS IN LAB ANIMALS EXPOSED FOR PROLONGED

RTECS: 9999999ZZ

EXPOSURE TO HIGH CONC IS EXPECTED TO BE LOW DUE TO

RTECS: 9999999ZZ

WATERING, HDCH, NAUS, DIZZ, & LOSS OF COORD ARE

RTECS: 9999999ZZ

ITCHING, BURNING SENSATION & VISUAL DISTURBANCES

RTECS: 9999999ZZ

CRACKING, BURNING, REDNESS, & SWELLING ARE

RTECS: 9999999ZZ

CAREFULLY TO DETERMINE THE TYPE OF AIRBORNE

RTECS: 9999999ZZ

PROPERLY FITTED.

RTECS: 9999999ZZ

SUGGESTED EXPOSURE LIMITS, THE LEL IN FIRE & EXPLO HAZ

RTECS: 9999999ZZ

PRODUCTS DUSTING WELDING OR FLAME CUTTING.

RTECS: 9999999ZZ

OF THIS PROD, CONTACT A POIS CONTROL CTR,

RTECS: 9999999ZZ

PIGMENTS

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 25-30%

OSHA PEL 1000 PPM

ACGIH TLV: 750 PPM;1000 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 10-15%

OSHA PEL 200 PPM;300 STEL

ACGIH TLV: 200 PPM;300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPANE, 2-METHYL-; (ISOBUTANE)

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 10-15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT

XYLENE (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 30-35%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENT INDICATE NO INCR RISK OF CANCER

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: HARMFUL OR FATAL IF SWALLOWED.
EYE: CAUSES EYE IRRITATION. SKIN: MAY CAUSE MODERATE SKIN
IRRITATION. INHAL: VAPOR & SPRAY MIST MAY BE HARMFUL IF INHALED.
VAPOR IRRITATES EYES, NOSE AND THROAT. REPEATED EXPOSURE TO HIGH
VAP CONCS MAY CAUSE IRRIT OF THE RESP SYS & PERMANENT BRAIN & NERV
SYS DMG. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INTENTIONAL MISUSE BY DELIBERATELY
CONC & INHALING THE CONTENTS CAN BE HARMFUL OR FATAL. CHRONIC:
AVOID LONG TERM & RPTD CNTCT. THIS PROD CNTNS TITANIUM DIOXIDE.
ANIMALS INHAL MASSIVE QTYS O F TITANIUM DIOXIDE DUST IN A LONG-TERM
STUDY DEVELOPED LUNG TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF
THIS (ING 9)

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER,
FOLLOWED BY WATERLESS HAND CLEANER AND SOAP & WATER IF THE MATL
APPEARS TO ADH ERE TO SKIN. INHAL: REMOVE TO FRESH AIR. APPLY ARTF
RESP & OTHER SUPPORTIVE MEASURES AS REQUIRED. OTHER: IF INGEST, ANY
TYPE OF OVEREXP OR SYMPS OF OVEREXP OCCUR DURING OR FOLLOWING THE
USE (ING 21)

Flash Point Method:PMCC
Flash Point:15.0F,-9.4C
Lower Limits:2.3%
Extinguishing Media:NFPA CLASS B EXTING (CO*2, DRY CHEM/UNIVERSAL
AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS IA FLAMM
LIQ FIRE
Fire Fighting Procedures:WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY
BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS AUTO
IGNIT OR EXPLO WHEN EXPOSED TO EXTREME (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT/ELEC EQUIP/SPARKS/OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPP DATA)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED WITH
PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN THE AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE, OR OTHER ABSORBE NT MATL & PLACE INTO CNTNRS FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LARGE QTYS
IN BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS IA
FLAMMABLE LIQUIDS.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT SYSTEM,
READ THE MSDS FOR THE OTHER COMPONENTS BEFORE BLENDING AS THE
RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PARTS.

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CONTROLS, VAP EXHST OR FRESH AIR ENTY. NIOSH/MSHA APPROVED
(TC-23C-) AIR PURIFYING OR AIR SUPPLIED (TC-19C-) RESPS MAY ALSO
REDUCE EXPOSURE. READ RESP MFR 'S INSTRUCTIONS & LITERATURE (ING
16)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED IN INGRED SECT BELOW LOWEST (ING 18)
Protective Gloves:NITRILE RUBBER OR NEOPRENE RUBBER.
Eye Protection:CHEMICAL-TYPE SPLASH GOGGS & FULL FSHLD.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: HEAT.IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
FIRE FIGHTERS SHOULD WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROT
EQUIP . EXPLO HAZ: SURFACES. TOX GASES MAY FORM WHEN PROD IS
CONTACTED BY FLAME OR HOT SURFS. AEROSOL-CNTNRS HOLD EXTREMELY
FLAMM GAS & FLAMM LIQUID UNDER PRESSURE.

HCC:F3
Boiling Pt:B.P. Text:>-69F,>-56C
Vapor Pres:< 74
Vapor Density:HVR/AIR
Spec Gravity:0.7-0.8
Evaporation Rate & Reference:< 49 (BUOAC=100)
Solubility in Water:< 31
Appearance and Odor:PRESSURIZED CAN CONTAINING PAINT & PROPELLANTS
W/ODOR CHRAC OF SOLV IN ING SECT
Percent Volatiles by Volume:85-95

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING, OR FLAME-CUTTING MAY PRODUCE FUMES INCL:
CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATL MUST BE DISP OF I/A/W FEDERAL, STATE,
PROVINCIAL, & LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED
WASTE MANAGEMENT FACILITY .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.